SNOW PLOW Electrical power UNIT

General Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is built to operate materials handling equipment. The decreasing motion is achived from the solenoid valve using the decreasing speed managed by an adjustable needle valve. The left and suitable functions are equipped that has a dual pilot operated examine valve and cross-over relief valves.
Remark: Please check with our sales engineer for that distinctive pump displacement, motor electrical power or tank capacity.
Special Notes
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned ahead of set up of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and absolutely free of impurities.N46 hydraulic oil is suggested.
four. This electrical power unit ought to be mounted horizontal.
five. Check the oil degree inside the tank just after the first start of the power unit.
six. Oil shifting is needed right after the first a hundred operation hours, afterwards once every 3000 hours.