DC MOTOR PUMP GROUP

DC MOTOR PUMP GROUP one
General Description
Consisting of a hefty duty DC motor and also the CB1S gear pump, this pump motor group is definitely an best hydraulic energy unit for mobile hydraulic equipments, this kind of as automobile carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP 3
General Description
This motor pump includes a 4.5″ DC motor plus a CBSR gear pump which has a typical electrical power up/gravity down circuit with a relief valve, a examine valve as well as a solenoid release valve.
Special Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned ahead of mounting the electrical power unit.
three. Viscosity of your hydraulic oil shoud be 15~68 cst, which should also be clean and free of charge of impurities. N46 hydraulic oil is advisable.
four. The power unit must be mounted horizontally.
five. The relief valve strain is preset about 25% increased compared to the working pressure.
six. Flow manage valve for lowing speed adjustment is obtainable unpon request.